This is a build-along for making a flattened PVC pipe bow. This style of bow made with PVC is more durable than the non-flattened kind, and looks more authentic. This bow, when finished, drew about 80# at 28".
What would MacGyver do if he was stranded on a trash dump in the middle of the ocean? If he had the right supplies, chances are he'd come up with something very similar to this PVC and duct tape boat. C'mon, we all know MacGyver always has duct tape on him!
There's a ton of videos on the web of musicians playing homemade PVC instruments, but I just recently stumbled upon the impressive work of PVC pipe player Kent Jenkins, aka Snubby J. His most recent video features a duet with his faux-twin, playing "Wizards in Winter" by the Trans-Siberian Orchestra. Turns out, he's been a PVC maestro for awhile now and even auditioned for his inspiration, the Blue Man Group, at the age of seventeen. Though he wasn't picked, they saw potential in him and aske...
I know, I know, you've probably seen entries about Theo Jansen's Strandbeests here before, but this goes straight to his url and has the smoothest video I've seen of them yet.
This goes through to a how-to on how to make a skein winder. For the uninitiated, a skein is the default unit of thread, and it's that windy log that yarn comes in as well. With this snappy tool, you can wind your own skeins as well. If you combine that with the newspaper into yarn concept, you can make your own yarn and wind your own skeins when you're done.
I've had a few short chances to see 3d printing in action, namely at the World Maker Faire in New York this year, and I have to say, the technology is very interesting.
This link drops into a middle page, but this guy has step by step photos of the whole process.
This is a sort of supplement to the Four-Element Table, with the additional four legs added for stability. The pipes are squished flat at the ends and riveted on, allowing this table to bear a much heavier load without compromising style.
This is definitely the work of a Trekkie.
Now how's that for alliteration? WOO! Anyway, this has already made the rounds, but if you haven't seen it yet, check this out. When you take a low-slung four wheel bike frame, a crap load of PVC pipe, miles of duct tape and about 1,000 hours, you, too can drive a Porsche without the high insurance payments.
1000 words, or this:
Tom Price used nothing more than PVC pipes, nylon cable ties, and a large hot plate to melt together the blossoms.
Just check out the video.
These guys take found item recycling to the max. This isn't exactly the most useful application for recycling, but if the stuff is going to be around for the next couple of thousand years, it might as well look cool.
I really like home made squirt guns, and some of these people go completely nuts in their designs. Here's another.
This forum has a discussion about painting PVC that has some opinions from very accomplished people, including Volpin Props. They go over primers, adhesion promoters, sanding and more, and if you see these people's work, they are the go-to guys for informed ideas on this subject.
My goal here is to eventually show every single thing that people have come up with using PVC pipe so that we can be truly innovative here. What I'm starting to notice is that the cutting edge is in constant motion. We, as human beings, continue to improve on yesterday's ideas. While this page in particular is not extremely remarkable, it continues to show the versatility of this material. Sooner or later though, this coarkboard should have a nice rundown of everything that people are doing. ...
Theo Jansen is really cool. If you dig around in the corkboard here, you can find another video about him. He makes amazing kinetic sculptures from PVC pipe, and has a wonderful artistic point of view. I just discovered this old TEDTalks podcast via Taylor Browning's site. Fantastic stuff, check it out:
A DIY car laptop mount that uses the cup holder... You think texting and driving is bad, wait until it's true multitasking and driving. Ouch.
Oh, the fun of bending sheets.
These are cool!
With some PVC Pipe and little mesh, you too can have backyard chickens!
This is all I can say...
A thousand words.
Just when I thought I'd scoured the internet for every cool existing PVC project, this thing came up.
Super cool DIY PVC skeleton from the Robot Group: "At this point it is not much more than a mannequin. With the recent acquisition of a lot of cool pneumatics, it should be possible to make a very interesting animated human..."
I WILL BOMBARD YOU WITH GARDEN IDEAS UNTIL YOU GROW YOUR OWN FOOD!
This guy made his own telescope, and you're never going to guess what he used for the body.
This is an excessive performance mod for a computer, but ecxessive is good in the computer world.
Not all of these involve PVC, but the majority do, and they all have their merits.
Super cool art installation.
These guys always make cool things, and when you give them a stack of PVC pipe, it is no exception. There's a rough how-to here that shows concepts without walking you through the actual projects they made. Very cool stuff.
There's no how-to here, but I think anyone can figure this out. Great idea. I will probably make one for myself.
With about ten bucks and some imagination, you can make some cool stuff.
The P.S. 1 Young Architects Program design competition is always an amazing event. Recently, an architectural firm called Bjarke Ingels Group made this showing at the P.S.1.